51 47 217 Removing and installing/replacing loading sill end cover (rear light) on left or right

Necessary preliminary tasks 

• Remove LUGGAGE COMPARTMENT TRIM ON SIDE PANEL 
• Move Convertible top into half-opened position
• Support Convertible top compartment lid with suitable tool

Remove luggage compartment cover (1) from roof fastener mechanism (2).

Fig 1: Identifying Luggage Compartment Cover Of Roof Fastener Mechanism

Courtesy of BMW OF NORTH AMERICA, INC.

Partially lift off seal (1).

Lift out expanding rivets (2).

Remove end cover (3).

Fig 2: Identifying Cover With Seal And Expanding Rivets

Courtesy of BMW OF NORTH AMERICA, INC.