51 46 050 Removing and installing/replacing top trim on rear apron

Necessary preliminary tasks 

• Remove FRONT LUGGAGE COMPARTMENT FLOOR TRIM 
• Remove LOADING SILL END COVER 

Release screws with special tool 51 2 040 on rear apron trim (1).

Partially lift off seal (2).

Fig 1: Removing Screws Using Special Tool (51 2 040)

Courtesy of BMW OF NORTH AMERICA, INC.

Lever out expansion rivets (1).

Remove panel for rear apron trim (2).

Fig 2: Identifying Rear Apron Trim With Expansion Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip lights (1) on rear apron trim (2).

Remove rear apron trim (2).

Fig 3: Identifying Lights On Rear Apron Trim

Courtesy of BMW OF NORTH AMERICA, INC.