51 43... Removing and installing/replacing left or right rollover protection cover bracket

Operations on right side analogous to left side shown. Use graphics in a mirror-inverted way.

Necessary preliminary tasks 

• Remove UPPER (REAR) PARTITION PANEL 

Release screws (1) and (2).

Remove split rollover protection cover bracket (3).

Fig 1: Identifying Split Rollover Protection Cover Bracket With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement 

Modify wind deflector (1) and coat hook (2).

Fig 2: Identifying Wind Deflector And Coat Hook

Courtesy of BMW OF NORTH AMERICA, INC.