61 31 996 Carrying out steering angle sensor adjustment

IMPORTANT: In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "INITIAL OPERATION/ADJUSTMENT FOR ACTIVE FRONT STEERING " and must not be carried out separately!

NOTE: Steering angle sensor adjustment must be carried out:

Before adjustment work on the front axle/steering.
after all mechanical work on the steering system.
E46 (all-wheel drive), E53, E83: after disconnecting the battery.
after replacement/coding/programming of the following components:
Fixture for switches of steering column/switch cluster/steering angle sensor.
Dynamic Stability Control (DSC) control unit.
Control unit active anti-roll stabilization (ARS).

Connect vehicle to BMW diagnosis system or Software Service Station.

Select and carry out steering angle sensor adjustment.