LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1999 (Self Diagnosis - Diagnostic Trouble Codes - DTC P11AA - DTC P12B6 (N63 & S63)) >> Diagnostic Trouble Codes (DTCS) MSD85 - Bn2020 >> DTC P169A, BMW Hex Code 0x101902, BMW Code 1054978: Throttle Valve Actuator Start Test Limp-Home Position Failed (Bank 1) >> Monitoring criteria

Monitoring criteria

WARNING: This page does not describe the selected car, but rather 52 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

The fault is recognized when the voltage values for the two throttle valve sensors are not within the valid range for the emergency-air position while an activation signal is being applied (Sensor 1: 0.74 V +/- 0.3 V; Sensor 2: 4.26 V +/- 0.3 V) Potential problem source(s):

-Defect in wiring harness between DME and throttle

scientia non olet · About LEMON Manuals