LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1998 (Self Diagnosis - Diagnostic Trouble Codes - DTC P0035 - DTC P0480 (N63 & S63)) >> Diagnostic Trouble Codes (DTCS) MSD85 - Bn2020 >> DTC P112D, BMW Hex Code 0x128F04, BMW Code 1216260: O2 Sensor Negative Current or Positive Current control Circuit/Open (Bank 2 Sensor 1) >> Monitoring criteria

Monitoring criteria

WARNING: This page does not describe the selected car, but rather 53 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

the sensor voltage is higher than 1.899 V and less than 2.1 V or less than 2.1 V in overrun mode.

Potential problem source(s):

-Defect in wiring harness to pre-catalyst oxygen sensor 2

-Oxygen sensor 2 forward of catalytic converter defective

-Defective DME

-Defective catalytic