Repair procedures (plant/service)
WARNING: This page does not describe the selected car, but rather 53 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
-If diagnostic fault codes for the DMTL are logged, then clear the control module fault memory
-Carry out DMTL operational test (see 'Condition for logging diagnostic fault code')
-If it is possible to reproduce the fault with the DMTL operational test then look for a leak in the EVAP vent system