LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Self Diagnosis - Diagnostic Trouble Codes - DTC P14C0 - DTC U1179 (N63 & S63)) >> Diagnostic Trouble Codes (DTCS) MSD85 - Bn2020 >> DTC U119D, BMW Hex Code 0xCD9304, BMW Code 13472516: Lost Communication With BSD (Bit Serial Data Interface) >> Repair procedures (plant/service)

Repair procedures (plant/service)

WARNING: This page does not describe the selected car, but rather 52 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

Unplug all components on the BSD with the exception of the oil condition sensor, clear diagnostic fault codes from the control module fault memory and then ignition off/on. If the diagnostic fault code is logged again this means that the oil condition sensor is defective.

-Reconnect all of the remaining devices on the BSD one after the other, clear the control module fault memory, and then switch the ignition off/on, continuing until the defective component is found.

-If the fault is not found, check the BSD. If the fault appears sporadically then check all

scientia non olet · About LEMON Manuals