Monitoring criteria
WARNING: This page does not describe the selected car, but rather 52 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
The fault is recognized when the power-supply voltage at accelerator pedal module sensor 1 varies from 5V by more than 0.21 V.
Potential problem source(s):
-Defect in power-supply voltage to sensor 1 at the accelerator pedal module
-E7X: DME main relay displays lag when switching
-Defective DME