Repair procedures (plant/service)
WARNING: This page does not describe the selected car, but rather 52 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.
L4: 1. Unplug main relay. 2. Check control wire from DME to main relay. If not OK, then repair. 3. Check the relay contacts for electrical continuity. The contacts must be open when the relay is disconnected. If not, then replace the relay.