LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> X6 50i >> Repair and Diagnosis >> External Pages >> Different car >> Section 1539 (Self Diagnosis - Diagnostic Trouble Codes - DTC P14C0 - DTC U1179 (N63 & S63)) >> Diagnostic Trouble Codes (DTCS) MSD85 - Bn2020 >> DTC P0687, BMW Hex Code 0x1F0501, BMW Code 2032897: ECM/PCM Power Relay Control Circuit High >> Monitoring criteria

Monitoring criteria

WARNING: This page does not describe the selected car, but rather 52 other vehicles, including the 2013 BMW X6 M, 2013 BMW X5 M, 2013 BMW M6, 2013 BMW M5, and 2013 BMW Alpina. However, it is still accessible from the selected car via links, so may be relevant.

off the main relay contacts must open and the voltage at the DME must return to 0V. If this does not occur, the contacts are sticking or an electrical malfunction is present.

Potential problem source(s):

-The control-activation wire is shorted to ground.

-The contacts in the relay