11 14 Case Covers
CASE COVERS-TIGHTENING TORQUE SPECIFICATIONS
| Type | Thread | Description | Tightening Specification | ||
|---|---|---|---|---|---|
| 1AZ | Jump guard to crankcase | N63 | M6 | 10 Nm | |
| 2AZ | Timing case cover to crankcase, bottom | N63 | M8 | 21 Nm | |
| 3AZ | Timing case to cylinder head, top | N63 | M6 | 10 Nm | |
| 4AZ | End cover (oil) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid gasket required) | 10 Nm |
| 5AZ | End cover (water) to crankcase (transmission side) | N63 | M6 | Observe tightening sequence (liquid gasket required) | 10 Nm |