51 13 116 Removing and installing/replacing cowl panel cover

Necessary preliminary tasks: 

• Remove both windscreen wiper arms, see 61 61 081 REPLACING (REMOVING AND INSTALLING) LEFT OR RIGHT WINDSCREEN WIPER ARM .
• Remove both microfilter housing covers, see LEFT MICROFILTER HOUSING COVER and RIGHT MICROFILTER HOUSING COVER .

Release clips (1).

Feed out cover (2) towards top.

Installation: 

If necessary, replace faulty clips (1) and associated grommets in body.

Installation: 

Make sure grommets (1) are correctly seated on wiper pivots.

Grommets (1) for wiper pivots must not be damaged.

Installation: 

Cowl panel cover (1) must be correctly guided on right and left under windscreen cover (2).