LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> X6 35i >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> Rear Lid Trim Panel >> 51 46 050 Removing and installing/replacing top trim on tail panel

51 46 050 Removing and installing/replacing top trim on tail panel

Necessary preliminary tasks: 

NOTE: The operation is described on the left side; proceed in the same way for the right side.

Release screw (1).

Remove trim (2) upwards.

Fig 1: Identifying Trim Screw
G06212891Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Catches (1) and guide (2) must not be damaged.

Make sure catches (1) and guide (2) are correctly seated.

Fig 2: Identifying Catches And Guide
G06212892Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in mucket (1).

To avoid damaging the rear lid and cover, carefully close the rear lid and check correct seating.

Fig 3: Identifying Mucket
G06212893Courtesy of BMW OF NORTH AMERICA, INC.