41 0 0 Contents Of Body Repair General Information
General notes → QUALITY STANDARD → WORKSHOP EQUIPMENT
Safety regulations → SAFETY AT WORK → INFORMATION ON HAZARDS
→ Information on VEHICLE PROTECTION
Materials → MATERIALS SCIENCE → USE OF MATERIALS in outer shell
Handling components after an accident → ELECTRICAL SYSTEM , electronics and fibre optics.
→ Passive safety See 41 00... HANDLING AIRBAGS AND RESTRAINT SYSTEMS or 72 12... PROCEDURE AFTER AIRBAG DEPLOYMENT AS RESULT OF AN ACCIDENT
→ Vehicles with Hybrid drive
→ CHASSIS, SUSPENSION AND STEERING
→ Retractable hardtop
Body dimensions → 41 00... FRAME ALIGNMENT CONTROL BODY DIMENSIONS .
→ 41 00... BODY GAP DIMENSIONS
Cavity sealing → Installation of shaped parts See 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (EXPANDED) , 41 00... INSTALLING A CAVITY ACOUSTIC BAFFLE (NOT EXPANDED) or 41 00... INSTALLING A CAVITY SEALING WITH 2-COMPONENT PU CAVITY FOAM
Vehicle identification number → VEHICLE IDENTIFICATION NUMBER, GENERAL
→ STAMPING VEHICLE IDENTIFICATION NUMBER
Repair techniques → REPAIR STAGE 1
- Replacement of screwed-on components.
- Removing dents.
- Bonding and riveting
- Welding using a MAG welder
- without straightening bench
- Bonding and riveting
- Welding using a spot welding system
- with a straightening bench
Corrosion protection → GENERAL INFORMATION
Paint → GENERAL INFORMATION
→ INFORMATION / WARNING LABELS
→ Sectional painting See 99 00... SEPARATE COMPONENTS/PAINTWORK , 99 00... INTERIOR PAINTING or 99 00... SECTIONAL PAINTING