65 50 150 Removing and installing/replacing trim for rear cabin monitor base at front and rear

Special tools required: 

• 00 9 340

Attention! 

Trims may only be replaced in pairs so as to avoid differences in color.

Using special tool 00 9 340 , unclamp trim (1) on both sides.

Fig 1: Removing Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Unclamp trim (1) for base at front with special tool 00 9 340 and remove.

Fig 2: Removing Front Base Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.

Open armrest (1).

Unclamp trim (2) for base at rear with special tool 00 9 340 and feed out.

Fig 3: Removing Rear Base Trim Using Special Tool (00 9 340)

Courtesy of BMW OF NORTH AMERICA, INC.