51 24 133 Removing and installing/replacing drive for Soft Close Automatic on rear lid (soft closure aid)

Necessary preliminary tasks:

Security vehicles:

Disconnect plug connection (1).

Release screws (2) and feed out bracket (3).

Tightening torque 51 24 5AZ .

Fig 1: Identifying Plug Connection, Screws And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque 51 24 4AZ .

Unfasten cable tie (2).

Remove soft closure aid (3) from bracket (4).

Installation:

Fig 2: Identifying Cable Tie, Screws And Bracket

Courtesy of BMW OF NORTH AMERICA, INC.