51 12 801 Replacing bracket for rear bumper at left or right

Necessary preliminary tasks: 

• Remove REAR BUMPER SIDE SECTION 

Release screws/nuts (1).

Release expander rivets (2) and remove bracket (3).

Tightening torque 51 12 3AZ .

Fig 1: Identifying Screws/Nuts And Expander Rivets

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Guides in area (A) of bracket (2) must not be damaged.

If necessary, replace faulty metal nuts (1) on bracket (2).

Fig 2: Identifying Bracket, Guides, And Metal Nuts

Courtesy of BMW OF NORTH AMERICA, INC.