61 62 060 Removing and installing/replacing rear wiper motor

Necessary preliminary tasks: 

• Remove REAR WINDOW WIPER ARM .
• Remove TRIM FOR REAR LID .

Unfasten plug connection (1) and disconnect.

Release screws (2) and remove rear wiper motor (3).

Tightening torque 61 62 1AZ .

Installation note: 

Check wiper pivot grommet for signs of damage.

If necessary, replace grommet.

Fig 1: Identifying Rear Wiper Motor Plug Connection With Screws

Courtesy of BMW OF NORTH AMERICA, INC.