63 13 250 Removing and installing/replacing front left or right side repeater mirror

Necessary preliminary work:

Removal:

If applicable, unlock and disconnect the connector (1).

Release the screw (2) and remove the side repeater (3) from the housing of the exterior mirror (4).

Fig 1: Identifying Exterior Mirror Screw, Side Repeater And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Attach the side repeater (3) to the housing of the exterior mirror (4).

Tighten down screw (2).

If applicable, connect the connector (1).

Installation note:

Make sure the side repeater (3) is correctly fitted on the exterior mirror housing (4).

Fig 2: Identifying Exterior Mirror Screw, Side Repeater And Connector

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: