31 35 005 Removing and installing anti-roll bar link for left or right anti-roll bar
IMPORTANT:
Risk of damage!
- Avoid bending the head of the anti-roll bar during assembly!
- An impact screwdriver must not be used!
Detach bracket for brake hose on spring strut.
IMPORTANT:
When releasing push rod screw connections (1) and (3), it is essential to counterhold with a Torx tool.
Slacken nut (1).
Tightening torque 31 35 4AZ
Release nut (3) and remove anti-roll bar link (2).
Tightening torque 31 35 3AZ
Installation note:
Replace self-locking nuts.