61 62 030 Removing and installing/replacing wiper arm on rear window

Special tools required:

Fold open protective cap (1) in direction of arrow.

Release nut underneath.

Tightening torque 61 62 2AZ .

Fig 1: Folding Open Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Detach wiper arm (1) with special tool 61 6 060.

Fig 2: Detaching Wiper Arm Using Special Tool (61 6 060)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Before fitting wiper arm, allow wiping system to run two wipe cycles into park position.

Adjust MEASUREMENT (A) between wiper arm and rear window edge.

Fig 3: Identifying Dimension Between Wiper Arm And Rear Window Edge

Courtesy of BMW OF NORTH AMERICA, INC.