51 45 195 Removing and installing/replacing instrument panel trim, bottom right

Release screws (1).

Firstly push trim panel (2) forward and then loosen from guides in area (3).

Lower front trim panel (2) a little and then pull off from guide in area (4) to the rear.

Disconnect plug connections behind and remove trim panel (2).

Fig 1: Identifying Front Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Latch mechanisms (1) and guides (2) must not be damaged.

Replacement

Fig 2: Identifying Instrument Panel Trim Latch Mechanisms And Guides

Courtesy of BMW OF NORTH AMERICA, INC.