51 12... Removing and installing/replacing rear bumper panel cover (X-Line)

Necessary preliminary tasks: 

• Remove BOTTOM COVER 

Release clamps (1) on inside of bumper panel and remove cover (2).

Fig 1: Identifying Bumper Panel Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note: 

Retaining tabs (2) and retaining lugs (1) may not be damaged or missing.

Fig 2: Identifying Bumper Panel Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Secure retaining lugs (1) on inside of bumper panel (3) with clamps (2) and secure.

If necessary, replace retainers (2).

Fig 3: Identifying Bumper Panel Clamps And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.