51 16... Removing and installing/replacing rear storage compartment (top)

Special tools required:

When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).

Necessary preliminary work:

Release lower screws (1) from top rear of storage compartment (2).

Fig 1: Identifying Storage Compartment Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Fold up center armrest if necessary (1).

Release upper screw (2) from upper rear shelf.

Fig 2: Identifying Center Armrest Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Using special tool 00 9 325 lever out storage compartment at top rear (1) and pull back to detach.

Fig 3: Removing Storage Compartment

Courtesy of BMW OF NORTH AMERICA, INC.