11 61 325 Removing and installing/replacing right charge-air duct (N20)

Necessary preliminary tasks:

Unlock snap fastener (1).

Fig 1: Identifying Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Visually inspect shaped sealing ring (1) for correct seating and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 2: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock snap fastener (1).

Remove charge air duct (2).

Fig 3: Identifying Charge Air Duct And Snap Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Visually inspect shaped sealing ring (1) for correct seating and damage.

VDA couplings are correctly fitted when they snap into place with an audible click.

Fig 4: Identifying Sealing Ring

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.