51 16... Removing and installing bracket for folding pack head airbag at holder for grab handle (headlining removed)

WARNING: Follow SAFETY INSTRUCTIONS for working on vehicles with airbag systems (risk of injury).

IMPORTANT: Risk of damage! Do not use sharp tools in the area of the head airbag.

IMPORTANT: Spread protective mats in working area to prevent metal chips from drilling operations from damaging the interior:

Fig 1: Identifying Protective Mats

Courtesy of BMW OF NORTH AMERICA, INC.

Drill off rivet head at bracket for folding pack head airbag with a twist drill (dia. 10 mm).

Fig 2: Drilling Off Rivet Plate Down To Rivet Shank

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Rivet bracket for folding pack head airbag with rivet gun (blind rivet dia. 6.4 mm).

Avoid rivet inclination.

Fig 3: Drilling Blind Rivet

Courtesy of BMW OF NORTH AMERICA, INC.