51 47 000 Removing and installing/replacing front (inside) left or right door sill cover strip

Special tools required:

IMPORTANT: Do not raise door sill cover strip (1) over entire length simultaneously.

clipped 3 times (2).

Unclip door sill cover strip (1) from clip (2), starting from the rear and moving forward, using special tool 00 9 317 .

Fig 1: Removing Entrance Cover Strip From Clip

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary lift clip (1) from floor panel (2) and clip on door sill cover strip.

Clipped 3x.

Fig 2: Identifying Floor Panel And Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace faulty clips (1) on door sill cover strip (2).

Clipped 3x.

Fig 3: Identifying Door Sill Cover Strip And Clips

Courtesy of BMW OF NORTH AMERICA, INC.