51 45 115 Removing and installing speaker frame on panel for instrument panel at top

Special tools required:

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Unclip trim (1) with special tool 00 9 325 from latch mechanisms and remove upwards.

Fig 1: Unclipping Trim With Special Tool (00 9 325)

Courtesy of BMW OF NORTH AMERICA, INC.

Retaining lugs (1) on speaker covers (2) must not be damaged.

Make sure speaker cover (2) is correctly seated.

Fig 2: Locating Speaker Cover Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.