61 61... Checking contact angle of windscreen wiper on left or right
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 61 6 100
Correctly adjusting the contact angle of the wiper arms is crucial to determining wiping quality. For adjustment, refer to the vehicle-specific repair instruction.
A/B = Distance between wiper blade (2) and trim panel on cowl panel (1)
NOTE:
Measurement is taken at the height of the locators (3) for the windscreen wiper arms
C= Contact angle between wiper blade center plane and windscreen
When using special tool 61 6 100, check the scale value according to the following table.
For RHD vehicles, change the preceding sign of the scale values.
- LHD vehicles, scale range 0 to -5
- RHD vehicles, scale range 0 to +5
| Model | Contact angle(C) on windscreen wiper arm | Scale value (LHD) on special tool | Setting dimension (A, B) on windscreen wiper arm | ||||
|---|---|---|---|---|---|---|---|
| Passenger's side | Driver side | Passenger's side | Driver side | Passenger's side | Driver side | Rear end | |
| F01/F02/F03/F04 | 85, 0 ° +3.0°-3.0° | 85, 0 ° +3.0°- 3.0° | -5 +3, 0 -3, 0 | -5 +3, 0 - 3, 0 | 60±3 mm | 70±3 mm | |
| F07 | 85, 0 ° +3.0°-3.0° | 85, 0 ° +3.0°- 3.0° | -5 +3, 0 -3, 0 | -5 +3, 0 - 3, 0 | 67±3 mm | 80±3 mm | |
| F10/F11/F18 | 85, 0 ° +3.0°-3.0° | 85, 0 ° +3.0°- 3.0° | -5 +3, 0 -3, 0 | -5 +3, 0 - 3, 0 | 60±3 mm | 65 ±3 mm | 30 mm |
| F06/F12/F13 | 85, 0 ° +3.0°-3.0° | 85, 0 ° +3.0°- 3.0° | -5 +3, 0 -3, 0 | -5 +3, 0 - 3, 0 | 82±3 mm | 88±3 mm | |
| F15/F85 | 82, 7 ° +2.0°-2.0° | 82, 9 ° +2.0°- 2.0° | -7, 3 +2, 0 -2, 0 | -7, 1 +2, 0 - 2, 0 | 109±3 mm | 96±3 mm | 30 mm |
| F16/F86 | 84, 0 ° +2.0°-2.0° | 83, 9 ° +2.0°- 2.0° | -6 +2, 0 -2, 0 | -6, 1 +2, 0 - 2, 0 | 109±3 mm | 96±3 mm | |
| F25 | 84, 0 ° +2.0°-2.0° | 84, 5 ° +2.0°- 2.0° | -6 +2, 0 -2, 0 | -6, 1 +2, 0 - 2, 0 | 66±3 mm | 69±3 mm 30 mm | |
| F26 | 84, 0 ° +2.0°-2.0° | 84, 5 ° +2.0°- 2.0° | -6 +2, 0 -2, 0 | -6, 1 +2, 0 - 2, 0 | 66±3 mm | 69±3 mm | |