LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> Alpina B7x >> Repair and Diagnosis >> Electrical >> Gauges >> Body Equipment - Repair >> Mirrors/Covers/Ashtrays/Shelves/Trays >> 51 16 195 Removing and installing (replacing) center armrest

51 16 195 Removing and installing (replacing) center armrest

Necessary preliminary tasks: 

Unclip fastener trim (1).

Release screws underneath.

Unclip center console trim (2) at points (3) and remove.

IMPORTANT: Do not  disconnect plug connections behind.
Fig 1: Identifying Fastener Trim And Center Console Trim
G08511369Courtesy of BMW OF NORTH AMERICA, INC.

Remove trims (1) on left/right in direction of arrow.

Fig 2: Removing Trims
G08511370Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on center armrest (2).

Fig 3: Identifying Center Armrest And Screws
G08511371Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on left and right sides.

Pull out rear center console trim (2) in direction of arrow.

IMPORTANT: Do not  disconnect plug connections behind.
Fig 4: Removing Rear Center Console Trim
G08511372Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and remove center armrest (2) in upward direction. Disconnect plug connection underneath.

Fig 5: Identifying Center Armrest And Screws
G08511373Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: