51 34 471 Replacing rear left or right door window glass (with roller sun blind)

Necessary preliminary tasks: 

• First move door window glass into position, see next work step
• Remove DECORATIVE STRIP FROM WINDOW FRAME .
• Remove SOUND INSULATION .
• Remove ROLLER SUN BLIND ON SIDE WINDOW .
• Remove trims from window frame. See REMOVING TRIM (REAR)  and REMOVING TRIM (FRONT) .

Open door window glass (1) up to measurement "A"

1. = approx. 150 mm
   Fig 1: Identifying Door Window Glass Measurement Dimension

   Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug (1) (risk of trapping).

Release locating clip (2).

Installation: 

If necessary, INITIALIZE POWER WINDOW .

Fig 2: Identifying Plug And Locating Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Remove door window glass (1) towards top.

Fig 3: Removing Door Window Glass

Courtesy of BMW OF NORTH AMERICA, INC.