51 16 355 Removing and installing/replacing driver's side fold-down compartment

When working on trim panel components, make sure that the sensitive surfaces are not scratched or damaged.

Release screws (1).

Tightening torque 51 45 6AZ .

Remove fold-down compartment on driver's side (2) in direction of arrow while unclipping or detaching at the bottom

Installation: 

Make sure driver's side hinged compartment (2) is correctly seated.

• Replace defective retainers (1).

Replacement: 

• Remount clamps (1).
  Fig 2: Identifying Retainers And Clamps

  Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) and fit handle on fold-down compartment.

Tightening torque 51 45 7AZ .