13 71 030 Removing and installing/replacing both intake silencer housings (S63)
WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Switch off ignition.
NOTE:
Description relates to the left intake silencer housing, the procedure for the right side is identical.
Release clamp (1).
Tightening torque 13 71 2AZ .
Disconnect connector (2) at the hot film air mass meter.
Release screw (3).
Tightening torque 13 71 1AZ .
Release hose (4) from intake silencer housing.
Pull off intake silencer housing (5) to the top out of rubber mount and remove.