LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2012 >> Alpina B7L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine - Repair - F01/F02 >> 1151 Water Pump With Drive >> 1151000 Removing and installing/renewing coolant pump (N63) >> Replace gasket

Replace gasket

If reusing the coolant pump: 

If a coolant pump is reused, it must be mechanically rotated once (breakaway torque at pump impellers).

One coolant pump rotation will be sufficient.

If replacing the coolant pump: 

Release screws on coolant thermostat.

Tightening torque 11 53 1AZ .

Remove coolant thermostat.

Installation note: 

scientia non olet · About LEMON Manuals