11 11 Engine Block, Cylinder Crankcase N63 B44
ENGINE BLOCK, CYLINDER CRANKCASE SPECIFICATION
| Bore stage 0(1) | mm | 89.000+0.014 | ||
| Bore stage 00 a) | mm | 89.250+0.014 | ||
| Bore stage 1 a) | mm | 89.500+0.014 | ||
| Permitted out-of-round of cylinder bore a) | mm | 0.005 | ||
| Permitted conicity of cylinder bore a) | mm | 0.01 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||