1128050 Replacing A/C compressor drive belt with belt tensioner (N63): Notes
IMPORTANT:
Risk of damage!
Release screws (1) on vibration absorber only if removal position is adjusted.
If contaminated with hydraulic fluid:
Replace drive belt.
Crank engine at central bolt in direction of engine rotation.
Release screws (1) on vibration absorber only if removal position is adjusted.
If contaminated with hydraulic fluid:
Replace drive belt.
Crank engine at central bolt in direction of engine rotation.
Installation note:
If the drive belt is to be reused, mark direction of travel and reinstall drive belt in same direction of rotation.