1100670 Securing engine in installation position (N63): Notes

WARNING: Danger of injury!
Observe following instructions relating to special tool: 

1. Prior to each use, check the special tools for defects, modifications and operational reliability.
2. Damaged/modified special tools must not be used!
3. No changes or modifications may be made to the special tools!
4. Keep special tools dry, clean and free of grease.

IMPORTANT: Before lifting the engine, check the lifting lugs for damage (cracks) and to ensure they are seated securely.

NOTE:

• Numbering system for special tools has been re-encoded.

IMPORTANT: Special tool 00 6 000 must not be fitted when transverse member (1) is installed!

Fig 1: Identifying Transverse Member

Courtesy of BMW OF NORTH AMERICA, INC.