The following applies in general

To avoid damage, observe the following instructions:

• Avoid compressive and tensile loads
• Make sure cables are laid without kinks or abrasions
• Ensure non-contacting routing at sharp-edged body components; use edge protection if necessary
• Secure additionally laid cables/lines with cable straps

To avoid damage, observe the following instructions:

• Avoid compressive and tensile loads
• To ensure professional repairs, perform repair work only with BMW-approved or recommended special tools and spare parts
• Make sure cables are laid without kinks or abrasions
• Ensure non-contacting routing at sharp-edged body parts; use edge protection if necessary
• Secure additionally laid cables/leads with cable ties