51 47 077 Removing and installing/replacing illuminated rocker panel trim on rear left or right entrance (outer)

Necessary preliminary work:

Lift out cover (1) with special tool 00 9 317 in upward direction.

Disconnect plug connection (2).

Remove cover (1).

Fig 1: Lifting Out Cover With Special Tool (00 9 317)

Courtesy of BMW OF NORTH AMERICA, INC.

If necessary, remove clips.

If necessary, lever clips out of entrance with suitable tool.

Fig 2: Identifying Finishing Strip Clips

Courtesy of BMW OF NORTH AMERICA, INC.