11 65 Turbocharger and Control
TIGHTENING TORQUE SPECIFICATION - TURBOCHARGER AND CONTROL
| Type | Thread | Tightening specification | Measure | ||
|---|---|---|---|---|---|
| 1AZ | Exhaust manifold to turbocharger (D80 V - band clamp). | N63 | M8 | Replace V-band clamp | 20 Nm |
| 2AZ | Turbocharger to primary catalyst (D108 V - band clamp). | N63 | M8 | Replace V-band clamp | 20 Nm |
| 3AZ | Heat protection plate | N63 | M6 x 12 | 10 Nm | |
| 4AZ | Heat shield to crankcase, oil return cover or cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 5AZ | Heat shield to crankcase. | N63 | M6 x 22 | 10 Nm | |
| 6AZ | Vacuum reservoir to crankcase and cylinder head. | N63 | M6 x 14 | 10 Nm | |
| 7AZ | Bracket, electropneumatic pressure converter, to cylinder head. | N63 | M6 x 18 | 10 Nm | |
| 8AZ | Hexagon nut (2 x) Electropneumatic pressure converter to bracket. |
N63 | BM6 | 10 Nm | |