11 12 Cylinder Head with Cover
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD AND CYLINDER HEAD COVER
| Type | thread | tightening specification | Measure | ||
|---|---|---|---|---|---|
| 11AZ | Cylinder head cover | All | M6 | 10 Nm | |
| All | M7 | 15 Nm | |||
| M21 | M8 | 15 Nm | |||
| 12AZ | Oil trap to cylinder head cover | M21 | M8 | 17 Nm | |
| 13AZ | Timing case to cylinder head | All | M7 | 15 Nm | |
| All | M8 | 20 Nm | |||
| 14AZ | Plug for oil channel (microencapsulated) | M47/M57 | M12 x 1.5 | 20 Nm | |
| 15AZ | Vent plugs to cylinder head (coolant) | M67 | 2 Nm | ||