51 12 Rear Bumper
TIGHTENING TORQUE SPECIFICATION - REAR BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Support to body | F01/F02/F03/F04/F12/F13 | M12 | Replace nuts | 66 Nm |
| F07/F10/F11/F18 | M12 | 108 Nm | |||
| F25 | 68 Nm | ||||
| 2AZ | Guide, middle rear | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | Replace nuts | 4 Nm | |
| F25 | Replace nuts | 4.5 Nm | |||
| 3AZ | Guide, side, to body | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18, F25 | Replace nuts | 4.5 Nm | |
| Screw | 3 Nm | ||||
| 4AZ | Trailer tow hitch on support of bumper | ||||
| 5AZ | Bumper trim panel to side mounting | F07/F10/F11/F18 | 2 Nm | ||
| 6AZ | Bumper trim panel to rear light housing | F07/F25 | 4.5 Nm | ||
| F10/F11/F18 | 2 Nm | ||||
| F12/F13 | 2.8 Nm | ||||
| 7AZ | Bumper trim panel to bottom center mounting | F07/F10/F11/F18 | 4.5 Nm | ||
| 8AZ | Nut, rear silencer holder | F07/F10/F11/F12/F13/F18 | 21 Nm | ||