32 31 003 Removing and installing/replacing upper section of steering column trim

Move steering column in "bottom" and "extended" position.

IMPORTANT: Risk of damage!
Unclip steering column shroud (1) at side with special tool 00 9 317 .

Fig 1: Identifying Steering Column Shroud

Courtesy of BMW OF NORTH AMERICA, INC.

Pull steering column trim (1) towards front.

Unclip steering column gap cover (1) from upper section of steering column trim (2).

Remove upper section of steering column trim (2).

Fig 2: Identifying Steering Column Trim And Steering Column Gap Cover

Courtesy of BMW OF NORTH AMERICA, INC.