31 10 Front Axle Suspension
TIGHTENING TORQUE SPECIFICATIONS - FRONT AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Front axle support to engine support (screw connection, front, middle, rear) | F01 / F02 / F03 / F04 / F07 / F10 / F11 / F12 / F13 / F18 | M12 | Observe repair instructions. | 100 Nm |
| F25 | M12 | Replace screws. | ||
| Jointing torque | 100 Nm | |||
| Angle of rotation | 90 ° | |||
| F10 M5 / F12 M6 / F13 M6 | M10 | Replace screws. | ||
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90 ° | |||
| 2AZ Thrust zone to front axle support | F01 / F02 / F04 / F07 / F10(without M5) / F11 / F12 (without M6) / F13 (without M6) | M8 | Replace screws. | |
| Jointing torque | 15 Nm | |||
| Angle of rotation | 90 ° | |||
| F10 M5 / F12 M6 / F13 M6 | M10 | Replace screws. | ||
| Jointing torque | 56 Nm | |||
| Angle of rotation | 90 ° | |||
| F25 | M12 | 110 Nm | ||
| 3AZ Acoustic strut to front axle support | F01 / F02 | M8 | ||
| Jointing torque | 15 Nm | |||
| Angle of rotation | 90 ° |