11 14 Case Covers
TIGHTENING TORQUE SPECIFICATIONS - CASE COVERS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Jump guard to crankcase | N74 | M6 | 10 Nm | |
| 2AZ Gear case cover to crankcase, bottom | N74 | M8 | 21 Nm | |
| 3AZ Gear case cover to crankcase, bottom | N74 | M10 | 38 Nm | |
| 4AZ Gear case cover to cylinder head, top | N74 | M6 | 10 Nm | |
| 5AZ End cover (oil) to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 6AZ End cap (coolant) to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |
| 7AZ End cap to crankcase (transmission side) | N74 | M6 | Observe tightening sequence (liquid sealing compound required) | 10 Nm |