41 14 021 Replacing Front Left Wheel Arch Stripping Operations
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Disconnect negative battery cable
- Remove bumper trim
- Remove bumper support
- Remove headlight
- Remove radiator
- Remove A/C system condenser
- Remove and install charge air cooler
- Remove hydraulic steering cooling coil
- Remove intake silencer housing
- Remove coolant expansion tank
- Remove wheel arch cover (front section)
- Remove wheel arch cover (rear section)
- Front axle complete with engine and transmission
- Engine compartment lid seal locator
- Remove engine compartment lid
- Remove engine compartment lid hinge
- Remove left side wall
- Remove top left wishbone
- Remove left suspension brace
- Remove bulkhead sound insulation
- Remove brake booster
- Remove/detach hydraulic lines for power steering pump.
- Detach coolant hoses
- Detach fuel lines
- Release left wiring harness
- Partially release/remove thermal protection