51 12 050 Removing and installing/replacing support for rear bumper panel: Notes

Necessary preliminary tasks:

Lever out expander rivet (1) on adapter (2) and cover (3).

NOTE: Cover can vary.

The trailer tow hitch optional equipment is pictured.

Fig 1: Identifying Expander Rivet, Adapter And Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip adapter (1) on bumper panel (2) at marked points.

If necessary, unlock and disconnect plug connections on control unit for RDC or Smart Opener.

Fig 2: Locating Bumper Panel Clamps

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Operation is described on the left side. Right side identical.

Unscrew nuts (1).

Tightening torque 51 12 1AZ .

Slacken nut (2).

Remove carrier (3).

Fig 3: Identifying Rear Bumper Carrier And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.