MSA function is deactivated by

• Deactivate MSA by means of button (1) in passenger compartment
• Open seat belt buckle and driver's door
  Fig 1: Identifying Automatic Engine Start/Stop Button (MSA)

  Courtesy of BMW OF NORTH AMERICA, INC.
• Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
  • Workshop mode
    1. = 10 mm
  • Basic setting (engine hood/bonnet open)
    1. B = 7 mm

To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.

Fig 2: Identifying Engine Hood/Bonnet Workshop And Basic Setting Length

Courtesy of BMW OF NORTH AMERICA, INC.