Fitting spacer buffers

Fig 1: Locating Fitting Spacer Buffers

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: To avoid rear window breakage and wind noises:

Completely remove remnants of removed spacer buffers and maintain installation location exactly.

The following spacer buffer is fitted.

6 x spacer buffers (5x5x20)

Installation position of spacer buffers (1) is specified on body side with markings (2).

Installation note:

If necessary, replace faulty UPPER REAR WINDOW COVER .

If necessary, replace faulty LOWER RUBBER FRAME for rear window.